Item number 011472
cable suitable for direct burial
max. permitted temperature at conductor 90 °C
min. installation temperature -20 °C
installation in free air without UV-protection (cable UV-resistant)
cable for use in water
cable with VDE-certification
Standard | VDE 0276-620 |
Conductor material | aluminium |
Conductor class | class 2 = stranded |
Insulation | XLPE DIX8 |
Sheathing material | polyethylene DMP2 |
Colour outer sheath | black |
Flame-retardant | no |
UV-resistant | yes |
For outdoor use | yes |
Maximum permitted conductor temperature | 90 °C |
Permitted outer cable temperature, fixed | 70 °C |
Permitted outer cable temperature, in motion/during installation | -20 - +70 °C |
Bending radius, fixed installation | 15 x DA |
Nominal voltage Uo | 6000 V |
Nominal voltage U | 10000 V |
Maximum permitted operating voltage in three-phase systems | 12 kV |
Test voltage | 21 kV |
Conductor shape (Faber) | RMv |
Number of cores | 1 |
Conductor diameter | 27.6 mm |
Nominal cross section | 500 mm² |
Conductor resistance | 0.0605 Ohm/km |
Insulation wall thickness | 3.4 mm |
Ampacity in air (30 °C) | 767 A |
Ampacity in ground (20 °C) | 602 A |
Short-circuit current (1 s) | 47 kA |
Wall thickness of sheath | 2.5 mm |
Bending radius, fixed installation | 660 mm |
Conductor class | class 2 = stranded |
Outer diameter approx. | 44 mm |
Colour of outer sheath | black |
Tensile strength (during installation) | 15000 N |
Cable shape | round |
colour | black |
For installation in the ground, in water, outdoors, indoors and in cable ducts for power stations, industrial applications and distribution networks. The high mechanical durability of the PE-sheath permits strong mechanical stress during installation or operation. This cable is also suitable for unfavourable operating conditions, specifically where there is a need to avoid water penetration lengthwise following mechanical damage.
All images shown here are for illustrations and product reference purposes only.