Discover the diversity of Faber.
More cable is impossible.
Power cable NA2XY-J 04X150 SE 0,6/1 KV SW
Item number 090265
flame retardant acc. IEC 60332-1-2
cable suitable for direct burial
max. permitted temperature at conductor 90 °C
min. installation temperature -5 °C
installation in free air without UV-protection (cable UV-resistant)
cable for use in water
cable with VDE-certification
cable conform to Low Voltage directive
- Datasheet
- Application
- Technical documents
| Standard | VDE 0276-603 |
| Conductor material | aluminium |
| Insulation | XLPE DIX3 |
| Sheathing material | PVC DMV6 |
| Colour outer sheath | black |
| Flame-retardant | VDE 0482-332-1-2/IEC 60332-1-2 |
| UV-resistant | yes |
| For outdoor use | yes |
| Maximum permitted conductor temperature | 90 °C |
| Permitted outer cable temperature, fixed | 90 °C |
| Permitted outer cable temperature, in motion/during installation | -5 - +70 °C |
| Bending radius, fixed installation | 15 x DA |
| Nominal voltage Uo | 600 V |
| Protective conductor | yes |
| Nominal voltage U | 1000 V |
| Maximum permitted operating voltage in three-phase systems | 1.2 kV |
| Test voltage | 4 kV |
| Core identification | colours acc. to VDE 0293 (HD308) |
| Conductor shape (Faber) | SE |
| Number of cores | 4 |
| Nominal cross section | 150 mm² |
| Conductor resistance | 0.206 Ohm/km |
| Insulation wall thickness | 1.4 mm |
| Ampacity in air (30 °C) | 311 A |
| Ampacity in ground (20 °C) | 300 A |
| Short-circuit current (1 s) | 14.1 kA |
| Wall thickness of sheath | 2.4 mm |
| Conductor class | class 1 = solid |
| Outer diameter approx. | 42 mm |
| Tensile strength (during installation) | 18002 N |
| Cable shape | round |
| colour | black |
For fixed installation indoors, outdoors, in the ground, in water and in conrete.
All images shown here are for illustrations and product reference purposes only.